Erect spiral chute is significant in iron ore dressing

Erect spiral chute is significant in iron ore dressing

China is a resource-rich country, but China is a country short of resources, it is because China currently has a population of over 13 million. The huge population has caused tremendous pressure on the utilization of our resources, especially with the economic development in recent years, China’s demand for a variety of resources is increasing, and the contradiction between big demand for resources and sustainable use of resources is more and more prominent.

iron-ore-dressing
Baotou new material application design Institute has developed BX new magnetic series permanent magnet magnetic selected machine has characteristic of more poles (8 poles-12 poles), large magnetic package corner (1400–1550), high magnetic induction (180-750 mT), having rinse water, and high tailings spill stream mouth and so on. It applies to iron concentration at magnetic selected factory, nonferrous metals concentration at mine dressing factory, strong magnetic iron ore dressing, BF gas mud, and recycling magnetic waste material in sulfuric acid slag industry.
Erect spiral chute separator , align vertical line and fix the machine with a metal frame or wood in a right position; sand pump send the ore to the two feed ports in screw top, add additional water and adjust the concentration of ore slurry; ore slurry naturally falls from high vertiginously and generates an inertial centrifugal force in rotating inclined surface velocity; the action of gravity and centrifugal force of the swirling flow make the mineral and sand separated base on the differences in proportion, size and shape; concentrate inflows concentrate bucket and be collected by pipe, the tailings flow into the tailings bucket and be collected to sand pool by pipeline and be drained away with sand pump so that completed the whole process of beneficiation.
It is applicable to the materials whose concentration is not greater than 30% (by weight) and the particle size of the fixed component is less than 1mm. Before the agitation vat is put into use, the operator should fasten the bolts of the pump body and check the flexibility of the rotating shaft. The machine cannot be put into operation until all parts are confirmed to be normal. The mining agitation vat developed by our company is mainly used for the pulp stirring before the flotation to create the conditions for the flotation operations.

 

Leave a Reply

You must be logged in to post a comment.